VISI-DNC


	USB to CNC
	VISI-Hub can take a commercially available USB key for upload, download, drip-feed NC program.
	Use USB key to load NC programs directly, no need to wire CNC machines with network if so desired.
	Some old CNC memory can be either difficult or pricey to upgrade, with VISI-HUB, you can use USB key as an inexpensive "CNC Memory Upgrade". Add GigaBytes of NC storage for only $891 dollar.
	Do-It-Yourself Installation, free phone support with purchase.
	Compatible to CNCs with RS232 port, including Fanuc, Fadal, HAAS, Hurco, Yasnac, Mitsubishi etc.

FULL VERSION VISIDNC

VISI-DNC Brochure Down Load (1.4mb)


	Reliability	One dedicated VISI-Hub per machine, converting from TCP/IP to RS232 right before CNC. Fully wired network.

	Scalability	From 1 CNCs to 256 CNCs, software & hardware are fully scalable, they expand with your shop.

	CNC Compatibility	Tested with major CNCs in the market (Fadal, Haas, Hurco, Fanuc, Yasnac, Mitsubishi, Mazak, Siemens ...)

	Simultaneity	Supports up to 128 wired ports for simultaneous DNC or drip-feed; No waiting for each other.

	Remote Request	With a setup sheet, operator can call all NC programs in front of CNC, no need to run back and forth between machine and computer.

	Web Access	Taking advantage of ever more popular smart phones and break through devise like iPad. Alarm and video can be viewed anywhere inside the shop or out on the road.