 |
 |
 |
 |
 |
|
|
|
|
|
|
|
Compumill HMC |
|
Compumill HMC 410 Value - Performace - Affordability |
||||
| Features | Specifications | Case Studies | Accessories | |
| Major Specification: | |
|
Table Size (Pallet)
|
16.14" x 16.14" (410mm x 410mm) |
|
X Axis Travel
|
24.01" (610mm) |
|
Y Axis Travel
|
20.08" (510mm) |
|
Z Axis Travel
|
19.7" (500mm) |
|
B-Axis Index Table
|
360 positions (1 degree) increments |
| Rapid Travers Rate | |
| Liner Axes | 1200 IPM |
| Index Table | 20 RPM |
| Cutting Feed rate | |
| Linear Axes | 315 IPM |
| Table Load Capacity | 825 lb. (375 kg) |
| Maximum Fixture Size | 25.5" dia. X 28.75" high (650mm x730mm) |
| Spindle Speeds | 20 - 8000 RPM |
| Tool Holders | CAT-40 (BT-40 optional) |
| Pull Studs | MAS-1 (modified CAT version) |
| Automatic Tool Changer | 40 Tools |
| Tool Exchange time (T to T) | 1.8 seconds |
| Tool Selection System | Random bi-directional |
| Max. Tool Diameter | 3.3" (85mm) |
| (Adjacent pockets empty) | 4.9" (125mm) |
| Machine Accuracy: | |
| Linear Positioning | +/- 0.0002" over full stroke |
| Repeatability | +/- 0.0001" |
| Indexing Positioning | +/- 3.0 arc-second |
| Repeatability | +/- 1.0 arc-second |
| Motors: | |
| Spindle Drive Fanuc Alpha 18P | 12/15 hp. (9/11kw, cont/30 min.) |
| Axis Drives (X, Y, & Z) | 2.8 hp. (Fanuc Alpha 12) |
| (Rotary) | 1.4 hp. (Fanuc Alpha 6) |
| Hydraulic Pump Motor | 2 hp. (1.5 kw) |
| Coolant Pump Motors (2) | 0.75 hp. (.55kw) |
| Dimensional Data: | |
| Machine Height | 104.2" (2.646mm) |
| Floor Space | 145" x 105" (3,680 mm x 2,670 mm) |
| Net Weight | 19,140 lb. (8,700 kg) |
| Service Requirements: | |
| Electrical Input Power Source | 220 VAC +10 % -15% |
| 60 Hz +/- 1 Hz | |
| Total connected power | 25 kVA, 60 Amp service recommended |
| Air | 80 PSI, 1/2" supply line |
| Coolant capacity | 48 gal. (180 liters) |
| Standard Equipment: | |
| FANUC 18M CNC control | |
| Flood coolant system | |
| Automatic way lube | |
| Fully integrated bed design | |
| Full chip and coolant enclosure | |
| Operator work light | |
| Rotary pallet set-up stations | |
| Chip wash by separate pump | |
| Chip air blow through spindle | |
| Operator tool stand | |
| Pneumatic counter-balance | |
| Foundation leveling screws & washers | |
| Operator & maintenance manuals | |
| Hand tool kit | |
| Machine Options and Accessories: | |
 |
YASNAC J300 CNC control |
|
12,000 rpm spindle |
| Coolant through-the-spindle (200psi) | |
| Coolant through-the-spindle (1200psi) | |
| Rigid tapping | |
| Full fourth axis, 0.001 degree resolution | |
| 60-tool ATC magazine | |
| 120-tool ATC magazine | |
| Chip conveyor | |
|
Chip conveyor with built-in fine-chip filtering system |
| Hydraulic work piece clamping | |
| Pallet pool | |
| Additional pallet | |
| [Home] [Products] [About Us] [Regional] [What's New] [Support] [Contact Us] |